DIY Stock Tank Pool

DIY Stock Tank Pool

I cannot believe how many questions I am getting about our DIY stock tank pool! We completed this project last year in September, so this is our first Spring and summer to get to swim and enjoy our DIY pool!! I decided it was time to answer all the questions, and give you all the details on this stock tank pool.

Why a stock tank pool?

A stock tank pool is easy to maintain and the DIY is fairly easy, and budget friendly. We wanted a pool that our kids could enjoy, without the hassle of blowing up an inflatable pool every day, or the cost of an above ground pool.

What You’ll need for your DIY STOCK TANK POOL

Stock Tank 8′  |  Stock Tank 6′ (This is the one we have)

We purchased ours from Tractor Supply, but if you don’t have one near you, you can get this one delivered. 

Filter Sytem 

Waterproof Silicone Sealant 

Hole Saw (This connects into your power drill)

Plunger Valves 

Outlet for Pool

Things You Will Need to Maintain Your Pool

Chlorine Dispenser and Temperature Gauge

Chlorine Tablets 

Water Test Kit 

Pool Net 

Pool Accessories

Swan Pool Float 

6 foot Pool Cover 

8 foot Pool Cover 

Black and White Umbrella 

Umbrella Stand 

Stock Tank Pool Details

The original Stock Tank Pool was created by the girls over at Hey Wanderer Blog. They were extremely thorough in their DIY tutorial, and super helpful when you come upon issues.

DIY STOCK TANK VIDEO TUTORIAL 

Keeping You Stock Tank Pool Clean

Tips and Tricks from our Experience & Frequently Asked Questions:

  1. Make sure you drill the holes for the pumps in the center of your pool and not too high in the stock tank. We drilled our first hole too high and had to have my Brother in law weld a piece to fix our mistake. Learn from ours and make your holes lower than where your water line will sit.
  2. Prepare for the drilling. This part of the process was the hardest. Make sure you have someone with strength who can easily bore the hole into the metal, and a drill that has lots of power.
  3.  Q: Does the black pool get hot to touch? A: NO, surprisingly it stays pretty cool, and never too hot to touch.
  4.  Q: How big is your pool? A: We have the 6 foot pool. It is big enough for our whole family to sit inside.
  5. Q: Does it have a heater? A: Ours doesn’t have a heater. We might try and add one this next year. I will keep you updated!
  6. Q: Do you keep it exposed year round? A: We have a cover that we use during the year. You can also drain it and refill once a year.

 

If you have any questions about this project. Contact me, or leave me a comment below.

Be sure to Tag me in your Stock Tank Projects!!! & Pin the Photos to save the project for another day!

  • Facebook
  • Pinterest
  • Instagram
  • RSS
  • Email

Update your backyard or porch with this EASY DIY!

My Favorite Summer Picks on Amazon!

 

** This post contains affiliate links. Any purchases made through links helps support my blog. Thank you for your support!

2 thoughts on “DIY Stock Tank Pool

  1. Hi! What kind of paint did you use to the stock tank? I want mine black as well 😊

    1. Hi!! I used exterior paint and primer from Home Depot. This color is called Carbon by Behr. We had some small chipping up by the top. I think it is because we didn’t allow it to cure with enough time. Let it cure for a few days before adding water and you should be good to go!!

Comments are closed.